Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


The Early Days of Turbo - Part One

A look at the most famous turbocharged vehicles of all time - the 1977 - 1988 Formula One flyers....

By Michael Knowling

Click on pics to view larger images


This article was first published in 2003.

While turbochargers had been used in an assortment of racecars prior to the 1970s, it was the 1977 - 1988 Formula One turbo era that brought an intense burst of development. With the involvement of major car companies - most notably Honda, Renault and BMW - the sudden increase in R&D that went into turbocharging was monumental. Today - twenty years on - we've seen turbochargers accepted into mainstream mass-produced performance vehicles and those golden years of F1 turbocharging are remembered as something of an 'automotive fairytale'.

In Part One of The Early Days of Turbocharging we'll take a look at these awesome machines that pushed contemporary design...

The First Appearance

Click for larger image

From the late 1960s through much of the 1970s, almost every Formula One team used Ford's venerable Cosworth DFV V8 engine - it was the engine to have. These 3.0-litre V8 race engines breathed through 4-valve heads and employed mechanical fuel injection, slide-type throttles and - thanks to the fitment of CDI - could rev up to 13,000 rpm. Ferrari also campaigned a highly complex flat-12 engine at the time, with both engines reputedly making in the vicinity of 525 horsepower. Coinciding with this era, aerodynamic 'ground effects' had enabled extraordinary amounts of downforce with a minimal drag trade-off.

Click for larger image
In 1977, Renault was the first team along pit lane to experiment with a new breed of smaller capacity turbocharged engines. This gallant move was motivated by the company's foreseen image boost, technical spin-off and employee inspiration. Following the guidelines set by the governing body, Renault designed a turbo engine that could rival the all-dominating Cosworth 3.0-litre V8. Note that the maximum allowable swept capacity of a force-inducted engine had to be half that of a naturally aspirated engine - hence Renault's turbo engine, and all that followed, displaced a maximum of 1.5-litres.

Although the apparent weight advantage of the smaller engine seems attractive, it was found that - by the time the significant mass of the turbo system was added - there was no weight advantage at all. In fact, given the extra aerodynamic drag of the necessary intercooler(s), the package started off at a disadvantage. However, all of this became irrelevant when the immense potential for power was discovered. In their initial appearances, turbo engines were most noted for impressive performance on high-altitude racetracks. In these situations, teams could make up for the reduced air pressure found at higher altitude by simply adding more boost. Still - with a maximum power similar to that attained with the naturally aspirated 3.0-litre DFVs - this was only the start...

Click for larger image

In 1979 - just two years after their brave debut - Renault had won its first Grand Prix with a turbocharged engine. And that's when the rest of the field started to take notice - in fact, the majority of teams had proceeded to jump onto the turbo bandwagon by 1983. There were many engine configurations employed in a number of different chassis. To name just a few, Renault stuck with its DOHC, 24-valve 90-degree V6 (which went on to receive twin-turbos and a water-to-air intercooler at one stage), the twin-turbo Porsche/TAG engine used a 80-degree V6 platform and both Cosworth-Ford and Ferrari adopted a twin-turbo V6 block set at 120-degrees. Curiously, BMW adopted a single turbo, DOHC 16-valve, in-line four-cylinder (which was based on an already-aging engine design), while Zakspeed also competed with a single turbo in-line four-cylinder. Alfa Romeo even made a showing with a 90-degree V8 engine hung with twin-turbos.

Click for larger image

These first turbo engines were quite crude in many ways; they used a diesel engine based turbocharger, their static compression ratio was extremely low (around 6.5:1) and there were problems delivering the necessary fuel injection and ignition timing. This meant that bulk-rich mixtures and conservative timing had to be adopted to ensure a vehicle could finish a race. A technological step backward was also taken in regard to intake throttles - the turbo engines reverted to conventional butterfly throttles due to concerns that the movement of slide throttles might be affected by boost pressure. Note that the early 1.5-litre turbo engines also had a lower redline than the 3.0-litre naturally aspired engines - between 10,500 and 12,000 rpm was the redline for the entire field of turbo engines. This later increased to around 13,000 rpm.

Click for larger image

Boost pressure was quite low during these early years. Engines were boosted up to a relatively modest 2.5 Bar (absolute pressure) and there was great focus given to intercooling; it is said that charge-air temps were dragged down from 240 to 40 degrees Celsius post-intercooler. Such a configuration was good for around 650hp at the flywheel - BMW, for example, claimed 640hp for their 1983 Driver's Championship winning engine. Obviously, the turbo engines were now making a lot more power than the naturally aspired 3.0-litre F1 engines, but there were many concerns other than from outright power. Turbo lag, low-rpm torque and drivability were truly appalling and, as a result, the turbo cars were consistently slower around tight racetracks.

Pushing the Limits

As fuel injection and turbo technology progressed at an incredible rate during the early '80s, teams were able to - relatively safely - push boost higher and higher. Of course, there were a few engine and turbocharger failures along the way, which often led to spectacular fires ... Increases to 3.5 Bar boost became common for each team, giving rise to well over 700hp at the flywheel - nearly a third more power than the competing atmo DFV V8. Perhaps more importantly, the new developments made the engine more progressive and, therefore, easier to drive. Lag and low-rpm torque had been massively improved (partly thanks to the introduction of ball-bearing ceramic turbochargers) and Ferrari, albeit briefly, had also developed what we now label an anti-lag system, whereby a fuel/air mix was ignited in the exhaust manifolds.

Click for larger image

Ground effect aerodynamics - which had absolutely transformed the sport during the '70s - was officially banned in 1983, resulting in a halving of downforce. This meant teams had to go back to fitting massive wings, which - although restoring some of the lost downforce - came with a major drag penalty. This happened to play nicely into the hands of the turbo cars, which could generate the immense power necessary to haul the high drag wings through the air. A drag co-efficient of 1.5 (more than three times worse than the average family sedan) had become common 'overnight'.

Click for larger image

Late 1983 also saw the first teams using so-called 'jungle juice'. This heady mix of chemicals - which was just allowed under the governing body's loose terminology of 'fuel' - gave tremendous resistance to detonation and allowed boost pressure to soar. The BMW-Brabham, for example, was boosted to 4.5 Bar (absolute pressure, remember) for qualifying and output swelled to over 1000hp. For races, however, boost was reduced to give 'only' around 750hp - reliability was the name of the game. Drivability was also further improved, since the new jungle juice allowed a much higher static compression ratio (anywhere up to 9.4:1).

Meanwhile, Off the Field...

The Formula One turbo era was as much about manufacturer marketing as wining championships. With the public witnessing the advantages of turbo technology - in a wonderfully spectacular fashion - the consumer market received a sudden influx of production turbo cars. During the early '80s, vehicles such as Honda's City Turbo, Renault's Uno Turbo, BMW's 7-series turbo and, of course, Porsche's legendary turbos enjoyed terrific sales success - and paved the path for every turbocar to date.

Click for larger image

The next year was a continuation of the same theme. With more work on fuel grade and the introduction of fully electronic management systems, teams could boost their engines even further. Renault decided not to use any wastegates for the Australian GP, for example... As a result, qualifying manifold pressure rose to over 5.0 Bar (up to 5.5 Bar has been reported) and outputs were generously in excess of 1100hp - some sources say approximately 1300hp. It came as no surprise, therefore, when Gerhard Berger's Ferrari V6 twin-turbo was clocked at a milestone 218 mph (351 km/h). And, remember, we are still talking about little 1.5-litre engines...

Click for larger image

Of course there were a number of trade-offs that had to be made. The increased charge-air temperatures associated with such boost called for elaborate intercooler water spray systems, which poured out around 3-litres per lap. More horrendous, however, was the rate of fuel consumption - teams now had to be very careful not to run out of fuel during the race. Furthermore, the massive top-end power also created a very steep power curve that many driver's struggled to manage - for example, the single turbo BMW engine's power tripled between 6000 and 9000 rpm. This made driving a challenge - especially when considering the cars were limited to the same wheel and tyre size that had been used since 525hp atmo engines were the norm! Note, however, those cars using smaller twin-turbos were reputedly more responsive and progressive than the single turbo competitors.

From here, the horizon drew near for the turbocharged beasts.

The Premature End

Click for larger image

With increasing focus on safety and cost, measures were taken to slow the turbo cars. First, a race-day fuel ration was introduced in 1986 spelling a reduction in boost pressure and the end of any form of anti-lag systems. Simultaneous improvements in engine management allowed teams to safely run their engines a bit leaner (to help save fuel), but there was still a considerable overall power loss. Following this, in 1987, a 4.0 Bar boost limit was introduced whereby a pressure relief vale (aka pop-off valve) was fitted to the intake manifold of each car. Fighting a 4.0 Bar ceiling and tough fuel rations, many teams now reverted back to naturally aspirated engines.

Click for larger image

The last straw came in 1988, when boost was regulated to just 2.5 Bar and a harsher-still race fuel ration was introduced. This saw even more of the field step backward to naturally aspirated engines in preparation for the announced 1989 turbocharger ban. Still, with the awesome combination of Ayrton Senna and Alain Prost at the wheel, the 1988 McLaren-Honda turbo showed its worth by winning an amazing 15 out of 16 races. To this day, the McLaren-Honda MP4/4 remains the most successful F1 car, having won the Driver's Championship in '85, '86 and '88.

Despite this last show of strength, turbochargers were outlawed for the 1989 season and every subsequent F1 car has been naturally aspirated - and considerably less powerful...

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
How they did it

Special Features - 13 October, 2009

Building the Sydney Harbour Bridge

...but it never turned a wheel in anger

Special Features - 8 April, 2014

The fastest Mercedes of them all?

Do-it-yourself aero testing of the Mazda RX7

Technical Features - 11 July, 2007

Aero Testing, Part 5

DIY timer module adds delays or extended 'on' periods to any electric car function

DIY Tech Features - 1 September, 2008

The eLabtronics Timer

The aerodynamic development of Mercedes large sedans from the 1950s to the 1990s

Technical Features - 6 May, 2014

Aero Timeline

Great bits for the inventive

DIY Tech Features - 31 March, 2009

More Parts for Nothing!

Exploring some potential ultra light-weight vehicle building materials

Technical Features - 11 August, 2009

Cardboard Cars?

Using an electronic voltage switch module

DIY Tech Features - 3 February, 2009

How to Electronically Modify Your Car, Part 8

Unique and cheap modification to keep the car longer in lean cruise

DIY Tech Features - 7 April, 2008

Giving the Insight a Good Driver

Making a new airbox intake - but did it improve performance?

DIY Tech Features - 8 February, 2011

Powering-Up the 1.9 litre TDI, Part 2

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip