Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Buying at Salvage Auctions

Cheaper than a half-cut and lots more bits!

By Julian Edgar

Click on pics to view larger images


This article was first published in 2012.

When you want an engine and/or front brake upgrade, buying a half-cut from a wrecker has always been a great way of sourcing the bits. But these days, is there an even better way? With the reduction in the cost of used cars, and changed regulations relating to the re-registration of seriously accident-damaged cars, we think so.

Sourcing bits

Recently, I needed to source a new engine. Or a second-hand new engine anyway.

When in the past I’ve been in this situation, I’ve always bought a half-cut imported by a wrecker from Japan. That is, a car that has been cut off from the front seats forward – you get the front suspension and brakes, driveline, dashboard, engine and dash wiring looms, and ECU.

But when I recently started looking around at available half-cuts, the range seems much reduced over what was available five or 10 years ago. 

Click for larger image

And for anything desirable, the prices (up to AUD$3000) seemed a bit over the top. That was especially the case when I considered what I needed for my project - all the brakes (not just the front ones), plus the fuel pump and charcoal canister. It seemed that $500 or $1000 could be easily added in sourcing the bits that a half-cut wouldn’t give me.

So is there another way? The answer depends a bit on how common the engine is that you need, but if it’s a car sold locally – then yes, there is a much better way! The answer is to buy a complete car at a salvage auction.

Salvage auctions

Click for larger image

Salvage auctions are of damaged vehicles. Most vehicles have been accident damaged but occasionally a car pops up that looks fine but has an unmistakable mouldy smell inside – it’s been in a flood. (With other flooded cars, like the one pictured, it’s obvious what has happened to it…)

The cars are categorised in two ways – a repairable write-off, and a statuary write-off.

A repairable write-off, as the name suggests, can be repaired and then be inspected and re-registered. A stat write-off cannot, under legislation (here in NSW anyway) be re-registered.

Click for larger image

Stat write-offs are usually the more damaged of the two categories, and also because they cannot be put back on the road, are cheaper.

Like any auction, the sale price depends on demand.

At salvage auctions you’ll find that mainstream, low kilometre, repairable write-offs go for decent money. (In these cases, the sort of dollars you’d pay for a similar crashed car on – say – eBay.) But higher kilometre cars that are older or less mainstream are much cheaper than you first might expect.

Stat write-offs are all over the place in terms of sale price.

So who is buying these cars? People looking for donor parts for a project are a minority – most buyers are crash repair shops and wreckers. This means that the value criteria being applied by people after a donor car are different to most buyers… and that’s a good thing! If you want a special engine (say one that is physically small) and it’s in a crashed car that isn’t popular, you’ll likely get it very cheaply.

But there are some major downsides of buying at salvage auctions.

Click for larger image

There are no warranties and you cannot start the engine, let alone drive the car (if that would even be possible). In fact inspection is confined to what you can see by just standing and looking at the vehicle (well, you can get down on the ground as well).

Many cars do not have keys and very few have service books.

A 10 per cent deposit is payable on the fall of the hammer and full payment and pick-up needs to occur within a (short) defined timeline. The bid price does not include fees – you should know what these are before bidding.

Another point to keep in mind is that sometimes a car appears to sell and yet shows up again in the next week’s auction. Either the sale was too a dummy bidder (illegal? sure), the buyer didn’t cough up the dough, or the insurance company didn’t OK the price.

I think it’s best to attend the auction in person, but if you want to take a bigger risk, you can bid at many salvage auctions on-line. The auction may be on-line only, or may be a combined physical and on-line auction.

Doing it

Click for larger image

Having considered all of this, and wanting an engine that in outright terms wouldn’t be hugely powerful, I decided to buy the donor car from a salvage auction.

I attended an auction, having firstly looked carefully at the pics and descriptions placed on the auction website. When I arrived I found that one of my ‘picked’ cars had been withdrawn from the auction (no explanation given), and the other car that I had my eye on went for too much – I was outbid.

But attending was worthwhile as I got a feel for the sale prices. Some cars went very cheaply – literally a few hundred dollars buying a complete car.

Click for larger image

The next week I decided to bid online, and bid on a 1999 Honda Integra that had been lightly hit into a pole. Classed as a repairable write-off, the car had 160,000km on it and appeared (in the photos!) to be in good condition.

I won the auction.

My winning bid was $300 and the fees added $148, giving a total of $448. Hiring a car trailer and paying for fuel in a borrowed tow car took the total cost of getting the car to my shed to about $650. That’s for a complete car… (At the time of writing, uncrashed Integras of the same model and kilometres are selling for $5000 - $8000!)

Click for larger image

I removed the damaged front-end metalwork and holed radiator, temporarily added a discarded Holden radiator sourced free from the local garage, found a front wheel was flat through a damaged rim, fitted the space-saver - and went for a (short) drive. (The latter is one of advantages of living in a hamlet in the middle of nowhere.)

The engine ran sweetly, the throttle response and flatness of the torque curve was better than I expected, and it seemed to go about right for 107kW in 1150kg.

Pretty darn good for a total outlay of under five hundred bucks!

The bits

Click for larger image

Pulling apart the donor car, the thing that strikes me most forcefully is that you get so much! I want the brakes (complete system, possibly also including the ABS), driveline (including ECU, loom, driveshafts, engine mounts) and fuel system (the whole lot). And of course, with the exception of the radiator, it’s all there.

When I have taken the bits I want that leaves for sale the suspension, complete doors, hatch, tail-lights, seats and interior trim, etc. Even if I get only a few hundred dollars for that lot, the total cost is well down. Marketed well, you could in fact expect to make a profit!

And it sounds strange, but I reckon I have so far taken out of the car about $50 in high tensile bolts alone  - 6mm and 8mm metric fasteners that I usually use a lot anyway.

Finally, a complete car that’s still on its wheels is a lot easier to move around than a half-cut.

Conclusion

Click for larger image

If you have the space to pull apart a complete car and want a whole heap of parts for your new project, consider buying a gently crashed car at a salvage auction.

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
Electronic module that can sound high or low temperature alarms or warnings

DIY Tech Features - 30 June, 2008

The eLabtronics Pulser, Part 2

Building electronic kits

DIY Tech Features - 10 February, 2009

How to Electronically Modify Your Car, Part 9

Getting planning approval

DIY Tech Features - 7 February, 2012

A New Home Workshop, Part 3

Fuel economy of 1 litre/100km from an amazing car

Technical Features - 11 June, 2002

The World's Most Fuel-Efficient Car

Reducing engine intake restriction to a bare minimum

DIY Tech Features - 30 October, 2007

We Have a Record!

Reducing fuel use through electronic tweaks

DIY Tech Features - 27 September, 2006

Electronic Ways to Improve Your Fuel Economy

Looking at the future of hydrogen-fuelled cars

Special Features - 28 April, 2009

Will Hydrogen Happen?

The effects of changing dwell time

Technical Features - 26 August, 2014

Ignition coil dwell time

A revolutionary fuel saving device that works

Columns - 25 August, 2009

FuelSmart, Part 2

The Black Box is an electronic handling revolution

Technical Features - 10 February, 2009

Adjustable Stability Control!

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip