Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Buying a Half-Cut

A car sawn in half...

by Julian Edgar

Click on pics to view larger images

At a glance...

  • The negatives and positives of buying a half-cut from a wrecker
Email a friend     Print article

Buying a half-cut - the front half of the car containing all the good bits like the engine and gearbox - is an excellent way of getting together all that you need for an engine transplant, or simply as spares for the car you already have. But there are some distinct pitfalls as well.

The Positives

A half-cut exists because it’s much cheaper to cut off the part of the car with the engine than to transport the whole car. In fact, as the name suggests, a half-cut takes up around only half the space of a complete car. However, compared with buying a bare engine and gearbox, it’s much more bulky.

The advantages of buying a half-cut over an engine/gearbox combination are many.

Firstly, you get every mechanical component from the front half of the car. (In mid engine cars, a half-cut is the rear end.) So in addition to the engine and gearbox (and drive shafts in a FWD), you also get:

Click for larger image
  • The front suspension and brakes
  • Complete steering system, including hydraulic or electric power assistance (and usually the steering wheel)

Click for larger image
  • The engine bay wiring loom and all the relays, igniter modules, etc

Click for larger image
  • The ECUs for the whole car (which can include power steering , central locking and immobiliser, as well and engine and transmission ECUs)

Click for larger image
  • The dashboard, including all the switchgear

Click for larger image
  • The radiator and other front-mount heat exchangers (intercooler, oil cooler, air con condenser)

Click for larger image
  • Often some external panels and the inner guard, radiator support panel, etc

Click for larger image
  • Often some exterior lights and other fittings

Click for larger image
  • The complete underbonnet assembly, already put together (not something to be undervalued!)

If you’re transplanting a new, more powerful engine into your car, a half cut will have the bigger front brakes to match. It will also have everything – the brackets, bolts, cross-member and all the rest that very few wreckers bother salvaging when supplying you with just an engine and gearbox.

The Negatives

So what are the downsides? Firstly, a half cut normally costs something like twice the price of a bare engine/gearbox. That ratio depends a lot on what car you’re buying the bits from, but it’s about right.

Secondly – and this is one not to underestimate – it’s a helluva lot harder to physically deal with a half-cut.

Click for larger image

Despite the one shown here being the third that I have bought over the years, this half cut – from a Toyota Prius – was a real doozy. Basically, it was incredibly heavy, which made it near impossible to move around. Bought from interstate, I’d intended picking it up from the local freight depot with a 6x4 trailer, something I’d done in the past. (It’s a top-heavy load but still normally possible if taken very carefully and slowly.) But in this case it would have been dangerous. So that meant delivery by a crane truck – at extra cost, of course.

Click for larger image

Then, when I’d expected to be able to put some heavy-duty castors under the pallet on which it arrived, it turned out that to move it around, an engine crane built on a very strong underpinnings was needed. It’s no big deal if you’re prepared, but don’t expect to man-handle a half-cut around like you can an engine.

Another negative is that it’s harder for both you and the wrecker to ascertain the state of the engine. Years ago I bought a Subaru Legacy turbo half-cut – only to find when I got home that the front cam pulleys on the engine had all been broken by a minor front-end impact. And of course, whether the engine crank had kept turning with stationary camshafts was also unknown... It went back to the wrecker – but it was all a hassle.

Click for larger image

In this case, the car has obviously suffered a front three-quarters hit, damaging the radiator and the power converter heat exchanger. But I didn’t know that when I bought it sight unseen, and I doubt if the wrecker had spotted it either. It’s also a bit of a hit or miss affair (pun - ho ho) whether or not you get lots of good panels – or none. If you get a pristine set of panels, you can sell them off to defray the cost of the half cut.

Click for larger image

Finally, you should know something about the car that you’re buying the half-cut from. In some cars there are very important bits which may be missing, simply because they come from the other end of the car. That might be the gearbox (some rear-wheel-drive, front-engine cars have the gearbox mounted at the back) or as in the case of this car, a high voltage battery that is normally mounted behind the rear seat. As can be seen here, in this case it was included.

Conclusion

When looking at doing a major engine transplant (or other major modifications that might result in broken mechanical items), we’d always recommend buying a half-cut. You just get so many important bits and pieces. But when making the decision to go that way, don’t overlook the negatives.

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
The technology of Nissan's famous twin turbo V6

Technical Features - 28 February, 2008

The Nissan VG30DETT

How good were they?

Special Features - 15 June, 2010

The First Holdens

A press so huge it can forge titanium beams over 5 metres long

Special Features - 29 October, 2013

The Wyman Gordon 50,000 ton forging press

Lunar Rover: the only car literally out of this world

Special Features - 14 October, 2008

World's Greatest Cars, Part 2

Measuring ride quality

Technical Features - 4 May, 2010

Ride Quality, Part 2

How to use taps and dies

DIY Tech Features - 7 April, 2006

Making Things, Part 4

A real and effective $75 handling upgrade

DIY Tech Features - 8 December, 2004

Rear Sway Bars: Improving FWD Handling

Finding why a V8 Cobra replica was getting hot under the collar

DIY Tech Features - 14 April, 2009

Chasing Overheating

Part two of an R32 Skyline GT-R modification process

DIY Tech Features - 6 September, 2011

GT-R Unleashed

An ultra high pressure do-it-yourself water injection system

Technical Features - 22 April, 2008

The H2O Way, Part 2

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip