Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us


A 151kW ATW Toyota Seca with the works!

Words by Michael Knowling, Pix by Julian Edgar

Click on pics to view larger images

At a glance...

  • Family hand-me-down Seca
  • Now pumping out 151kW at the wheels
  • Custom paint
  • Big-as-will-fit wheels and tyres
  • Full leather interior and audio visual system
Email a friend     Print article

When people spend thousands of dollars enhancing their car, there’s usually some kind of ‘connection’ with the vehicle. It might have a sentimental appeal, they might like the image it projects or quite simply it might give the biggest bang for buck.

Well, Matthew X’s Toyota Seca CSi is an exception. Matthew tells us the car came into his possession when his aunt handed it to him ‘not running’. After transporting the vehicle home, the reason for the Seca’s immobility was soon revealed.

It had a flat battery.

Matthew can’t help laughing when he tells this story and, to this date, he has cunningly avoided telling auntie what was actually wrong (so keep this to yourself!).

Once the Seca fired into life with its new battery, Matthew was able to enjoy the awesome performance from its carby 1.6 litre engine. Er-hum. At this stage, it was more important to address the looks department – hubcaps and a standard ride height aren’t exactly the kind of things that come to you in dreams... In the first instance, Matthew whacked on a set of 17 inch Shooting Star rims along with custom lowered springs.

Click for larger image

This was a good start but the aged standard maroon paint was a big turn off. Fortunately, Matthew’s a pretty handy kinda guy so he proceeded to strip the car back to its bare essentials before getting his brother to stir together a custom purple paint mix. This was sprayed by a nearby panel beater and Matthew put everything back together.

And the result? Well, pretty much what you see here – undoubtedly the most bad-ass looking Toyota Seca in Australia! The only recent body alteration is a set of 18 inch Zenetis wearing 225/35 rubber. Matthew likes to change wheels on a regular basis and says the 225/35 18s are a very tight squeeze under the rolled guards. Yep, this car is rubber’d to the max!

With the body lookin’ top-notch, it wasn’t the engine that came in next for mods – it was more urgent to fix the interior.

Click for larger image

Have a look inside and you’ll see a custom cream/yellow leather and blue suede covering the dashboard, console, door trims, roof lining and seats. The seats, by the way, are reshaped versions of the standard seats – and you’d never guess it! A Momo timber steering wheel, aftermarket shift knob and a trio of AutoMeter gauges (oil pressure, water temp and boost pressure) finish things off nicely.

And we mustn’t gloss over the spectacular audio/visual system.

Click for larger image

Open the rear hatch and you’ll find a pair of 12 inch Sony Xplod sub woofers, Sony 6 x 9s and a big 1200W 4 channel amplifier integrated with the new interior colour scheme. Up front there’s a CD/DVD unit with a flip-down LCD monitor. And, not to be outdone, Matthew also fitted a giant 16 inch LCD flip-down television screen that’s mounted on the underside of the roof – watching it is sorta like sitting in the front row seat at the cinema!

And now, yep, it was time to fix the engine performance.

Click for larger image

Matthew handed the car to V&E Rigoli who proceeded to remove the factory motor to make space for a 4A-GZE import engine. Matthew wanted somewhere around 150kW (200hp) at the wheels so it was decided they’d remove the factory supercharger (which can be unreliable at such high power levels) and run the low-comp engine with a custom turbocharger set-up.

Click for larger image

V&E Rigoli fabricated a custom exhaust manifold from steam pipe and mounted a Garrett T28 turbocharger alongside a TurboSmart 38mm external wastegate. The exhaust system is a mandrel 3 incher fabricated by V&E, while the intake side of things is taken care of by a K&N filter mounted ahead of the left front wheel.

Click for larger image

With the big wastegate set to give two different boost levels (11 psi and 15 psi) via a TurboXS bleed, there’s a need for good intercooling. V&E fitted a custom polished front-mount ‘cooler and mandrel pipework. Note that an Odyssey battery was required to provide clearance for the intercooler pipes and the standard front bumper got the chop to fit the core. Other engine bay goodies include a TurboXS blow-off valve and an oil catch can.

The 4A-GZE was purchased from an engine importer minus its associated ECU so the task of controlling ignition timing and fuel delivery was handed to an EMS programmable system. Note that V&E also converted to an EFI Seca fuel tank and high pressure pump. Oh, and while the car was up on the hoist and the back-end was pulled apart, the existing drum brakes were replaced by discs as fitted to more upmarket Seca models. A high quality set of brake pads were also slipped in.

Click for larger image

The engine is mated to the factory Seca 5 speed using a heavy-duty clutch and, so far, there haven’t been any problems breaking gears – but the selector forks are a different story. Matthew says he’s pretty fast and furious changing gears - and this photo shows the result! A distinct lack of traction undoubtedly helps the gearbox survive its torque loading – Matthew says there’s not a lot of hook-up through first and second gears. A LSD is on the wish-list for the near future.

Click for larger image

Poor traction comes as no surprise given the amount of power this front-wheel-drive Seca is punching out – 151kW (203hp) at the wheels on the V&E Dyno Dynamics chassis dyno, which translates to roughly three times the stock output! Matthew tells us he uses the car on a regular basis and, aside from selector forks, it’s been extremely reliable. How well the gearbox will hold up when a LSD and sticky tyres are fitted is the big question – it’s likely some strengthening will be required to run Matthew’s 12 second quarter mile goal.

Click for larger image

Whatever time the car runs, you can bank on the engine soon receiving an all-out performance build along with a bigger turbo. Matthew says the body could also do with another freshen up – a respray in the same high-impact colour along with maybe shaved door handles and gutter lines.

Matthew says he’s dreaming of a 10 second Seca; just so long as the battery has enough juice to crank the engine over...


V&E Rigoli                                                      +61 2 9756 3413

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...

Share this Article: 

More of our most popular articles.
Finding the best place to put an engine cold air intake

DIY Tech Features - 10 July, 2001

Siting Cold Air Intakes

The Black Box is an electronic handling revolution

Technical Features - 10 February, 2009

Adjustable Stability Control!

Building your own 270 watt home sound amplifier

DIY Tech Features - 14 May, 2013

Building a home sound amplifier, Part 2

Inside the construction of some aluminium cars

Technical Features - 2 September, 2008

Aluminium Cars

A new low cost data logger

DIY Tech Features - 30 June, 2009

Five Channel USB Data Logger, Part 1

The aerodynamic development of Mercedes large sedans from the 1950s to the 1990s

Technical Features - 6 May, 2014

Aero Timeline

What needs to happen to get to the next stage of aerodynamic slipperiness

Technical Features - 29 April, 2008

Analysing Road Car Drag

Great bits for the inventive

DIY Tech Features - 31 March, 2009

More Parts for Nothing!

One of the most significant cars ever

Special Features - 21 April, 2009

The Amazing Citroen DS

Reducing engine intake restriction to a bare minimum

DIY Tech Features - 30 October, 2007

We Have a Record!

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip