Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


The Rumpler Tropfenwagen

An astonishing car

by Julian Edgar

Click on pics to view larger images


Click for larger image

This is the world’s first aerodynamic production car – the Tropfenwagen. Developed by Edmund Rumpler in 1921, it not only incorporated extreme low-drag design but also used an innovative 6-cylinder, W-configuration mid-mounted engine and had independent rear suspension.

So what is the story of this car – and the man who designed it?

Click for larger image

Edmund Rumpler was born in 1872. He was an Austrian automobile and aircraft designer who carried out most of his work in Germany. After studying engineering, Rumpler joined Daimler in 1898 as a car designer, then in 1902 moved to Adler becoming, at the age of just 30, technical director of that car company. Here he designed the first German car where the engine and gearbox were mounted together as a unit. In 1903, he patented a swing axle rear suspension design.

Click for larger image

After the Wright Brothers invented the aircraft, Rumpler’s attention turned to aircraft design. He left Adler in 1907, and in 1910 Rumpler became the first aircraft manufacturer in Germany. The most famous aircraft produced by the Rumpler company was the Taube, based on a design by Igo Etrich. Subsequently, the company went on to produce a range of aircraft of its own design.

Click for larger image

Following WWI, Edmund Rumpler returned to automotive design. The result was the Tropfenwagen, released at the 1921 Berlin Auto Show. The Tropfenwagen (German for ‘drop car’ – as in a water drop) had the extraordinary low drag co-efficient of 0.28, as measured in 1979 in the Volkswagen wind tunnel. (Frontal area was 2.57 square metres.)

It achieved this low drag by a number of measures, all carefully tested beforehand by Rumpler working with models in a wind tunnel.

Click for larger image

Disc wheels were used on most of the cars, rather than the exposed wire spoke wheels then universal.

Click for larger image

The windscreen and side windows were formed from glass panels curved in a single plane – another world first for a car.

Click for larger image

The degree of curvature of the windscreen was radical.

Click for larger image

Mudguards, instead of being curved to match the wheels, were straight and mounted horizontally, giving a very small frontal area.

Click for larger image

The lights were integrated into the aerodynamic shape, rather than being drag-inducing add-ons.

Click for larger image

However, the most radical aerodynamic innovation was the ‘tear drop’ plan-view shape. The boat-tailing was so extreme that the body work reduced in width to form a trailing vertical edge, where the exhaust pipe was placed.

Click for larger image

Mirroring this boat-tailing of the main body was the cabin, that also boat-tailed to a trailing vertical edge.

Click for larger image

This illustration, from a Rumpler advertising brochure, compares the aerodynamic wake of a Tropfenwagen with a contemporary car. And it’s not just advertising spin: at the time, a typical car had a drag coefficient of about 0.6!

Click for larger image

In addition to the extreme tear-drop shape when viewed from above, the Tropfenwagen also tapered a little in height towards the rear.

Click for larger image

Again this is shown in a comparison made in a contemporary advertising brochure. Incidentally, note that in both brochure shots, the turbulence drawn for the conventional car has a lot of artistic license, with turbulence shown where it is unlikely to have actually occurred (eg in front of the radiator grille).

Click for larger image

A further radical change over all other cars of the time was the use of a smooth undertray and a rear diffuser.

Click for larger image

The engine, in unit with the gearbox (really a transaxle), was placed ahead of the rear wheels.

Click for larger image

An engine-driven fan pushed air through the rear-mounted radiator.

Click for larger image

In this photo, the radiator can be seen mounted behind the engine. Note also the louvered exits for the cooling air, and how the louvers have been angled so that this cooling air doesn’t disrupt the airflow over the bodywork.

Click for larger image

The intake louvers for the radiator can be seen here.

Click for larger image

The engine was built by the Siemens and Halske company. It used a W-design with three banks of paired cylinders displacing 2580cc. Power output was 26kW.

Click for larger image

The independent, swing-arm rear suspension used long, trailing cantilever leaf springs that were angled outwards and joined the axles near the hubs. Further rear wheel location was provided by angled rods mounted behind the axles. Along with the wheels, the rear suspension was fully exposed to the airflow. A recent reference suggests that the drag penalty of not enclosing the wheels may have been as high as 50 per cent.

Click for larger image

The front suspension used a non-independent beam axle sprung and located by leading cantilever leaf springs mounted parallel with the body. These springs attached to the axle well inboard from the wheels and so must have provided very little front roll stiffness.

Click for larger image

The Tropfenwagen was a genuine production car – but it was not a commercial success. The W-engine had problems, the steering could shimmy, and the first versions of the car did not have a boot. Roads on which cars could travel at higher speeds had not yet been developed, and so the aerodynamic advantages weren’t reflected in improved fuel consumption. One hundred of the cars were built, of which only two now remain. Both are on display in German technical museums.

Click for larger image

The Tropfenwagen was available in at least four different versions. Shown here is a 5-seat, long wheelbase, open car that used a more conventional 2614cc in-line four-cylinder engine developing 37kW. Note also the wire wheels and the different side air intake. All cars used a single, central seat for the driver. In the photos shown in this story, the lighter blue car is the long wheelbase model and the dark blue car, the short wheelbase.

Click for larger image

After the Tropfenwagen failed in the marketplace, Rumpler returned to aircraft. Rumpler was Jewish, and he was imprisoned after Adolf Hitler came to power in 1933. He was soon released but his career was ruined. He died in 1940.

Click for larger image

It is only when you see the Tropfenwagen next to a conventional car of the time that you can fully appreciate the radical nature of the Rumpler machine. The Tropfenwagen may have been a commercial failure, but its swing axle rear suspension, mid-mount engine and transaxle, and aerodynamic design helped create the path followed by the later Auto Union racing cars of the 1930s.

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
The Eighties Group B rally cars with up to 600hp

Special Features - 21 February, 2003

The Early Days of Turbo Part 2

How Ford in the US is developing safety systems - it's very weird!

Special Features - 29 September, 2009

Water-Blasting Cannons and Shopping Trolleys...

A forgotten Japanese classic

Special Features - 6 January, 2009

Mitsubishi Colt Fastback

Advancing the ignition timing can result in better fuel economy

DIY Tech Features - 28 April, 2008

The 5 Cent Modification

The Formula 1 turbo flyers

Special Features - 13 February, 2003

The Early Days of Turbo Part 1

Assessing the performance of an amazing human powered vehicle

DIY Tech Features - 15 January, 2008

Air 150 Recumbent Trike, Part 2

Building twin 15 inch subwoofers under the house floor

DIY Tech Features - 27 November, 2012

Sound in the Lounge, Part 2

Ideas that you can actually use in your home workshop

DIY Tech Features - 29 November, 2011

Real World Workshop Safety

Japan's first supercar

Special Features - 8 February, 2008

Toyota 2000GT

Why an engine's peak power figure is becoming increasingly insignificant

Technical Features - 12 June, 2008

Forget the Kilowatts

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip