Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us

Metal Casting, Part 1

From simple to complex - sand casting metals in aluminium.

by Julian Edgar

Click on pics to view larger images

At a glance...

  • Patterns...
  • ...from simple to complex
  • Cores
  • Runners
  • Risers
  • Example castings and patterns
Email a friend     Print article
This article was first published in 2008.

Click for larger image

There are two really good reasons to know about metal casting.

The first is that knowledge of metal casting will allow you to better understand how items are produced, and consequently what the limitations and benefits of this process are. Simply, you’ll be able to look at castings with a much more educated eye.

The second reason to know about metal casting is that you may be able to use castings in your own car modifications. If the item is to be made in batches as small as even five, castings can have a major benefit over fabrication (eg by welding) or machining (eg on a computer-controlled machining centre). Those benefits can be in terms of appearance, strength and cost.

In this three-part series we’ll be concentrating on casting in aluminium. Aluminium is easily cast, easily machined and (depending on the grade) can be heat-treated for additional strength. Aluminium castings won’t rust, can be powder-coated or painted, and are light.

Click for larger image

In this article, Part 1, we’ll look at the background to casting, and specifically sand casting – the cheapest and easiest way of producing small runs of a casting. We’ll look at patterns and moulds.

Click for larger image

In Part 2 we will cover the step-by-step making of a sand mould from a pattern, using a fairly complex casting as the example – the production of an aftermarket intake manifold.

Click for larger image

Finally, in Part 3, we’ll watch the pouring of the intake manifold, from the liquid aluminium entering the mould to the casting finished and ready to be sent off for machining.

So jump on for the ride. I found the process quite fascinating, and it was an amazing experience watching the pouring of the inlet manifold. When one is used to idea that metal is a hard substance that can be cut, filed or machined, watching it suddenly flow like water takes your breath away!

Sand Casting

Patterns and moulds can become complex very quickly, so let’s start with the absolute simplest.

Click for larger image

The fundamental process followed in sand casting is the creation of an impression in sand into which the molten metal is poured. The sand that is used goes hard after the impression has been made.

The sand can be a naturally occurring sand of an appropriate moisture content that is poured damp (ie soft), or as is almost always the case these days, it can be a silica sand containing binders and other chemicals that cause the sand to harden after it is exposed to air, and to go very hard when subjected to the heat of the casting process. With the latter type of sand, the binding chemicals are mixed with the sand as it is dispensed from a special machine (pictured).

To create the correctly-shaped impression in the sand, a pattern is used. In its simplest form, the pattern looks like the outside shape of the finished casting. Let’s take a look.

  • Simplest Casting

Click for larger image

Here is the finished product – a small wheel.

Click for larger image

The pattern for the casting is shown here. Note that even on this simplest of patterns, tapers have to be used so that the pattern will be able to be removed from the moulded sand without damaging the shape in the sand. As we will see next week, in more complex castings, the patterns may have to be made with separate parts so that they can be removed after moulding.

Click for larger image

The pattern is placed in the moulding box (usually made of wood although steel or aluminium can also be used) and sand is packed around the pattern. Patterns can be made from plastic, wood or steel. Wood is most often used.

Click for larger image

The pattern is removed from the moulding box, leaving its impression behind. (You can now see the need for the tapers on the pattern; a normal taper is 1.5 per cent.) The sand hardens, developing the strength to withstand the force of molten metal being poured into it.

Click for larger image

The molten metal is poured into the mould, the metal flowing and so taking the shape of the impression in the sand.

Click for larger image

The metal cools and hardens and then the sand is broken away, allowing the casting to be removed. (Sand moulds are used just once.) In this case, quite a lot of machining will be needed before the casting looks like the finished product, the wheel.

  • More Complex

In the casting process described above, the molten metal was poured straight into the mould. There was also no ‘top surface’ in the mould – the metal just assumed its natural level. However, in most sand casting, the mould completely surrounds the casting. This has two implications:

  1. The mould needs to be made in two halves that locate together

  2. Passages need to be created in the mould for the metal to be able to flow into the mould

Let’s take a look at another casting, but this time make the mould in two pieces and add the metal-flowing passages.

Click for larger image

Here the pattern has been placed in the wood moulding box.

Click for larger image

Now moulding sand has been packed around the pattern. (The ‘parting sand’ is a fine layer that later allows the pattern to be more easily withdrawn and prevents the two halves of the mould sticking together.)

Click for larger image

Now we see the first difference in this process – another moulding box has been placed on top and two tapered pins have been placed in position. These pins act as ‘mini patterns’, giving shape to the passages that will be formed through the sand.

Click for larger image

Sand has been packed around the pins, and then they have been withdrawn. On the right is the passage through which molten metal will be added (this is called a ‘sprue’ or ‘runner’). You can also see that a funnel shape has been created in the sand, simply to allow the metal to be more easily poured into the mould. On the left is the passage through which molten metal will rise as the pour is done. You can think of this as the ‘overflow’, although it shouldn’t actually have metal flow out of its top. (This passage is called the ‘riser’.) Some vent holes have also been placed in the sand (in modern sands the displaced air actually flows through the sand – no added vent holes are needed.)

Click for larger image

If you look closely at the above diagram, you’ll see that the runner (sprue) and riser don’t actually connect to the moulded impression left by the pattern. This is remedied with these impressions made in the sand.

Click for larger image

Here is the finished, assembled mould. The top part of the mould is called the ‘cope’ and the bottom part, the ‘drag’. The runner (where the metal will be added), the riser (where metal will rise) and the connecting passages to the part of the mould where the casting will be created can all be seen.

Click for larger image

This is the same diagram as above but the green colour has been added to show where the metal ends up. As can be seen, quite a lot of poured (and then solidified) metal is surplus to the required casting – after the sand is removed from around the casting, these surplus parts need to be cut off.


The moulds that we’ve seen formed so far have resulted in castings that are solid. The small wheel produced in the first example of casting described above not only needs to have its external diameter machined in a lathe, but it also needs to have a hole drilled through it for the axle.

Click for larger image

But forming the internal opening at the time the casting is made has two major advantages – it saves in waste material and, much more importantly, complex shape internal openings can be formed. In many castings, such as this cylinder head, forming the internal openings by machining after the casting was complete would be impossible.

The openings and passages within a casting are also formed by shaped sand; these pieces of the mould are called ‘cores’. When picturing the required shape of a core, think of it like this: the core is shaped the same way as the air space inside the casting. Cores are produced in their own patterns (more correctly called ‘core boxes’) before being inserted inside the main sand mould. Let’s take a look.

Click for larger image

Here is the desired finished product. This is a semi cutaway view – what is wanted is a casting that looks rather like a cotton reel.

Click for larger image

A cylindrical opening through the middle of the casting is needed, so a core of hard sand is required to form this opening.

Click for larger image

This core is created in its own pattern – a core box. The core box is in two halves (remember, the sand core needs to be able to be removed undamaged) and sand can be inserted into the core box through one end.

Click for larger image

The wooden pattern for the external shape of the casting is formed in two halves. One half goes in the top half of the mould (the cope) and the other half goes in the bottom section of the mould (the drag). The parting line (ie the separation point of the mould) is halfway up the side of the ‘cotton reel’ shape.

Click for larger image

Here is the full mould. The core piece is coloured orange and where the metal will flow is green. This drawing summarises all that we’ve covered – a sand mould made in two halves, a runner, risers, and a core piece.

Motorcycle Cylinder Barrels

Click for larger image

Here is an example of a simple casting – a motorcycle cylinder barrel. Look closely at the pic (click on it to enlarge). The cylinder barrel has a big opening through the middle of it – so the mould must have used a core. Furthermore, as with the ‘cotton reel’ casting described above, it must have been made using a two-piece mould. Look closely and you can see the parting line of the mould replicated on the casting (arrowed).

Click for larger image

Here is one half of the pattern for the cylinder barrel casting. Firstly note that the barrels are being cast in pairs – left and right. The runner through which the molten aluminium will flow is shown by the red arrow. Note how at the base of the runner the passage has been shaped to flow the molten metal around the two corners. The square objects (that will become square openings in the mould) indicated by the green arrows are for ceramic filters through which the molten metal flows. The very large risers above each of the castings are shown by the blue arrows. Note that in addition to being ‘overflow’ passages, the risers feed metal to the casting as it cools. This is important because the casting shrinks as it solidifies. (And this shrinkage means that all patterns are made oversize.)

Click for larger image

But what about the core pieces? As shown here, this part of the pattern (when it’s left its impression in the sand mould) would simply make the central part of the casting solid.

Click for larger image

But here’s the core box. The core box in this case is required to form only a cylinder of sand, one that can be located in the middle of the sand mould to prevent metal filling the middle of the casting. Therefore, this core box is very simple.

Click for larger image

Here are both halves of the pattern, minus the core box. As can be seen, the runner and risers are incorporated in only one side of the pattern.

Click for larger image

The completed castings ready for machining.


Before finishing, let’s take a look at some more patterns.

Click for larger image

This is the pattern for a design of motorcycle trailer hub (four at a time being cast)...

Click for larger image

...and this shows the patterns for two metal-working tools resting in half of the sand mould. Note how these patterns are made of metal and some added body filler.

Finally, giving us a taste of what we will see in Part 2 of this series, here are some of the patterns for an aftermarket carby intake manifold.

Click for larger image

The upper external surface pattern...

Click for larger image

...and the corebox for the runners...

Click for larger image

... with removable parts to allow the core to be extracted complete.


What seems a very simple idea - just create an impression in sand and then pour the metal into it – becomes increasingly complex when the intricacies of shapes, openings and internal passages are taken into account. However, once you get a fundamental understanding, the rest, er, flows from there.

Thanks to Matilda Foundry for their major help in preparing this series.


Ball, L, A Pictorial Text Book of Engineering, Jacaranda Press, 1962

Carvill, J, The Student Engineer’s Companion, Butterworths, 1980

Gray, T & McCormick, T, Metal Shop Technics, William Books, 1977

Hobbs, B, Aluminium, Bruce Publishing Co, 1938

Kaehler, H, Casting, Kaiser Aluminum, 1965

Klapakjian, S, Manufacturing Engineering and Technology, Addison-Wesley Publishing Co, 1995

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...

Share this Article: 

More of our most popular articles.
A very cheap workbench for your power tools

DIY Tech Features - 5 February, 2013

Building a power tool workbench

Gorgeous and fast

Special Features - 3 June, 2014

The Auto Union Racing Cars

The incredible land speed record Bluebird

Special Features - 3 April, 2006

World's Greatest Cars, Part 1

Useful parts for nothing

DIY Tech Features - 6 October, 2009

Getting the Good Parts from Scanners!

How to set the correct air/fuel ratios for different driving conditions

DIY Tech Features - 12 November, 2002

Tuning Air/Fuel Ratios

Finding why a V8 Cobra replica was getting hot under the collar

DIY Tech Features - 14 April, 2009

Chasing Overheating

All the detail on how direct petrol injection systems work

Technical Features - 3 January, 2007

Direct Petrol Injection

Advice on how to get into freelance writing

Special Features - 27 July, 2010

Changing a Life

Under $20 and an hour for a welding trolley

DIY Tech Features - 26 November, 2013

Make your own welding trolley

Making plans

DIY Tech Features - 24 January, 2012

A New Home Workshop, Part 2

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip