Magazines:  Real Estate Shopping: Adult Costumes  |  Kids Costumes  |   |  Guitars |  
This Issue Archived Articles Blog About Us Contact Us

Go-Getter GTS

A R33 Skyline GTS25t built for show an' go!

Words by Michael Knowling, Pix by Julian Edgar

Click on pics to view larger images

At a glance...

  • Custom paint and body kit
  • 300+kW at the wheels
  • Trust/GReddy intake manifold/plenum
  • R34 GT-R NUR-spec brakes
  • Show and go!
Email a friend     Print article

In most cases, a person's first car is usually something pretty crumby – the subject of much laughter once they've moved on to their second or third car. But not Matthew Rotolo’s first car - it's this amazing Nissan R33 GTS25t.

Matthew purchased the Skyline a few years ago as a purple painted stocker and, while most people were busy saving cash to upgrade to a better car, Matthew was moulding the Nissan into something special. It helps that last year he had “money to burn”!

Click for larger image

The first thing you’ll notice is the car is no longer purple. The Skyline has been stripped back to bare metal and draped in a custom mixed House of Colour gold. The normally pedestrian Skyline panels have also been tweaked to add even more appeal. You’ll find a modified Veilside body kit, shaved door locks, carbon fibre pillar trims and a Do-Luk spoiler-less boot lid (which effectively smooths the rear-end styling). A carbon fibre bonnet has also been fitted along with a GT-R grille and, if you look closely, you might notice the custom Godzilla-style GTS badge. Very neat!

With 187kW at the flywheel in standard guise, the Nissan R33 GTS25t is no slouch – but with the mods given to Matthew’s example you’re looking at around double the factory output. This is a combo capable of more than 300kW at the wheels on around 1.4 Bar boost. All engine modifications have been performed by BD4s Service Centre in Sydney.

Click for larger image

Internally, the Nissan RB25DET is stock with the exception of GT-R N1 oil and water pumps, HKS head gasket, mild HKS camshafts and adjustable sprockets. A Trust high-strength cam belt is also fitted to minimise the risk of catastrophe. A Trust aluminium radiator with silicon hoses keeps the RB running cool while a Cusco catch-can prevents blow-by sludge entering the intake.

Click for larger image

Breathing and throttle response are enhanced with a Trust/GReddy single throttle intake manifold and plenum. Induction air is hustled through a HKS Type S front-mount intercooler system with a HKS blow-off valve mounted immediately before the throttle. Boost pressures up to 1.5 Bar are generated by an off-the-shelf HKS turbocharger mounted on the stock exhaust manifold. The HKS compressor inhales through a HKS Power Flow air filter while the turbine blows into a mandrel bent exhaust; not much restriction at either end.

HKS 550cc injectors, a Sard pressure regulator and upgrade fuel pump provide the necessary juice while tuning has been performed by BD4s using an A’PEXi Power FC programmable ECU. Boost pressure is controlled by a stand-alone HKS EVC5 unit.

Click for larger image

With a massive increase in engine torque, an OS Gikken twin-plate clutch and two-way diff are necessary to get the goods to the bitumen. Anything else would either break or slip. Matthew says he’s recently switched to a set of Toyo RA-1 road-legal semi-slicks which give the rear-drive Skyline incredible adhesion – it’ll hook up properly even in first gear (so long as you don’t provoke wheel spin). The tyres were supplied as part of a sponsorship deal with Toyo.

Click for larger image

The suspension department is improved with Whiteline supplied coil-overs, rear sub-frame pineapples, upgrade swaybars, castor bushes and steering bushes. A huge HKS Kansai brace strengthens the front suspension towers and a GT-R brace adds beef to the rear. Stepping on the brake pedal awakens the new R34 GT-R NUR-spec Brembos combined high-performance pads and braided Nismo lines. In short, stopping is not a problem! These big brakes live behind attractive 18 x 8 and 18 x 10 Racing Hart Type CR rims.

Click for larger image

Indoors, Matthew has added a Clarion television (complete with X-Box) and a Pioneer head unit wired to Boston speakers. A Momo steering wheel and pedals, a custom painted dash and A-pillar mounted boost gauge are the only other changes. Defi gauges have been added since our photo shoot and Matthew is about to install Bride seats with matching Bride trim throughout the cabin. It should look spectacular.

But guess what time it is. Time to sell.

Matthew is currently looking for around AUD$40,000 - $45,000 for the car, but he may consider a swap for a Skyline GT-R – even though he’s whipped lots of them... If you’re genuinely interested, Matthew can be contacted through

Understandably, parting with this first car won’t be easy!


BD4s Service Centre +61 2 9879 3322

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...

Share this Article: 

More of our most popular articles.
Under $10 for a remote-controlled immobiliser!

DIY Tech Features - 27 November, 2012

DIY classic car immobiliser

Refining a light-weight pneumatic / hydraulic suspension system

DIY Tech Features - 13 July, 2010

Chalky, Part 9

Single-handedly erecting the framework for a home workshop

DIY Tech Features - 26 August, 2008

Building a Home Workshop, Part 3

Tweaking the engine management to run non-standard mixtures in closed loop

DIY Tech Features - 12 January, 2005

Altering Closed Loop Mixtures

Do-it-yourself aero testing on the road!

Technical Features - 13 June, 2007

Aero Testing, Part 1

Getting a home workshop to the lock-up stage

DIY Tech Features - 2 September, 2008

Building a Home Workshop, Part 4

Organising storage

DIY Tech Features - 17 April, 2012

A New Home Workshop, Part 8

A brilliant do-it-yourself handheld spotlight or bike headlight

DIY Tech Features - 11 February, 2008

Building a High Performance LED Lighting System, Part 1

One of the all-time great aero specials

Special Features - 10 January, 2007

Holden Commodore VL SS Group A Walkinshaw

Aluminium bellmouths in minutes

DIY Tech Features - 10 December, 2013

Making your own Bellmouths

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip