Magazines:  Real Estate Shopping: Adult Costumes  |  Kids Costumes  |  Car Books  |  Guitars |  Electronics
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Variable voltage power module

Control the brightness of lights and the speed of fans

by Julian Edgar

Click on pics to view larger images


Click for larger image

Here is an absolute beauty – a tiny, efficient and cheap variable pulse width power module.

Hook it up to a DC fan, and you can control the fan speed via the supplied knob. Power filament light bulbs (like the dash lights in most cars) and you can control their brightness, steplessly and without flicker. Want to have a cheap variable power supply? Just add one of these to a car battery or old PC plugpack.

And for under AUD$5, delivered to your letterbox, nothing beats this module for value. To find it, search on eBay under “1203B DC Pulse Width Modulator PWM DC Motor Speed Controller Regulator Switch”.

So is the module cheap and nasty? Surprisingly, I found it to live up to its specs – in fact, to more than live up to them!

The module is rated by the maker at 3 amps, quite a high current considering the board’s diminutive dimensions. But in testing I found it’s quite happy to run at this maximum current, with the supplied heat-sink rising only about 10 degrees C above ambient. In fact, I short-termed increased current to 4.5 amps and nothing turned to smoke…

Click for larger image

Here the module can be seen running an incandescent light bulb load, running at about 50 per cent duty cycle and with a current of just over 3 amps.

The measured pulse width modulation frequency is 25kHz. That is, the output signal is turned on and off 25,000 times per second. This is high enough in frequency that if you are controlling small motors (like those used in fans), the motor windings cannot be heard ‘singing’.

Input voltage range is 6 – 28V – so it’ll work on everything from a 6V old motorcycle through to a 24V truck!

Click for larger image

The board is about 51 x 33 x 16mm (L x W x H), with the knob protruding about 19mm. Connections are via a 4-way terminal strip, with the correct connections written on the bottom of the board in English. Four mounting holes are provided.

At this price and with this capability, this might be a situation where it’s worthwhile buying half a dozen of the modules and putting them aside for use as needed…

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
Got an old cordless drill around the place? Here are the parts you can salvage from it!

DIY Tech Features - 8 May, 2008

A Heap of Parts for Nothing!

To improve fuel economy, why not just reduce the amount of fuel that's injected?

Technical Features - 5 August, 2008

Running Lean for Economy

Drives like a big engine... but drinks like a little one! How do you achieve that?

Special Features - 23 March, 2010

The Confidence Trick

Restoring a petrol bowser on the cheap!

Special Features - 25 November, 2008

Restoring a Petrol Bowser

The steering

DIY Tech Features - 2 June, 2009

Chalky, Part 4

The technology of Nissan's famous twin turbo V6

Technical Features - 28 February, 2008

The Nissan VG30DETT

The electronics of diesel engine fuel systems

Technical Features - 29 January, 2007

Common Rail Diesel Engine Management, Part 2

Not just the largest aircraft made of wood, but also with incredible underskin technology

Special Features - 29 September, 2009

The Spruce Goose

A revolutionary fuel saving device that works

Columns - 25 August, 2009

FuelSmart, Part 2

What you need to know about arc welding

DIY Tech Features - 20 June, 2007

Beginners' Guide to Welding, Part 1

Copyright © 1996-2019 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip