AutoSpeed - Technology, Efficiency, Performance

Magazines: AutoSpeed | V8X | Silicon Chip

Shopping: Real Estate | Cars | Fishing Tackle | Musical Instruments | Electronics

Blog

Email a Friend	Article: Cutting Metal
Your Name:
Your Email:
Friend's Email (1):
Friend's Email (2):
Friend's Email (3):
Message:	I found this article at autospeed.com and thought you might be interested in reading it: 'Cutting Metal' - Tricks to get good results at home Whether you're making brackets to hold a piece of sound gear in place or forming a new panel, unless you've got a tame metal fabrication workshop around the corner, there's one aspect that will always confront you - cutting metal. So how easy is that, you're saying? Grab a hacksaw and whammo!, a few seconds later the metal's cut. But if you're someone who spends time actually doing this you'll realise that all isn't as easy as it seems. Like, how often has that hacksaw wandered off line and you've had to discard that piece of material? Or if you're heavily into electric jigsaws, how long did that metal-cutting blade actually last? Or, have you tried a nibbling tool - something that opens up completely new possibilities. Hmmm, maybe there is a bit more to this than first meets the eye! You can read the article at: http://www.autospeed.com/A_110292/cms/article.html